Jansen Medicars Mobile Power System, User Manual

Page: 8 / 16

Jansen Medicars
Version feb. 2012 – V1.0
Page 6
3 Instructions for use
The Mobile Power System is designed to provide 230VAC voltage to a mobile
system set-up, while the power-plug is unplugged. The 230VAC is delivered
from a battery pack.
Once the plug of the Mobile Power System is connected to a mains socket,
the output of the system is switched to the incoming voltage and at the
same time the battery is charged.
     

Main on/off switch

Status indication LEDs:
Green = 230VAC input voltage passed through to outputs
Yellow = 230VAC output voltage is derived from the battery

Battery condition indicator

Output: 4x IEC320, each equipped with a equipotentiality connection

Mounting system for Crozz one cart

Fuses: 2x 5AT (6,3x32mm)
Using the On/Off switch, the 230VAC to the output can be switched on and
off. The output voltage is provided by either the internal inverter or via the
power cord (when connected to a mains power socked). The battery is
charged as soon as the system is connected to a mains socket, regardless
the state of the power switch.
If the system is turned on, the status LEDs indicate whether the power comes
from batteries (orange LED lights up) or whether it comes from the mains