4
Operating Instructions
The blower attachments have air bleed 5.To blow up inflatable items, select
holes.these air bleed holes help the appropriate size blower
relieve some air pressure so that the attachment that will fit into the air
attachment does not blow off. However, valve.(Fig.16)
should an increase in air pressure be
desired,simply cover one or more of
the air bleed holes.
To use the blower attachments:
1
．
Pull up and hold the exhaust tab, Fig.16
with the free hand pull out the
exhaust grill.(Fig.13)
6.Turn the unit on and hold the blower
attachment and air valve whhie the
vacuum exhaust is pumping air into
the inflatable.
7.To detach the flexible hose turn
Fig.13 clockwise and pull out from blower
2
．
Remove the exhaust filter. port.
3
．
To place the blower port into the
Note:
Firmly hold the flexible hose by
exhaust outlet,align the lower tabs the attachment when blowing dirt or
on the blower port with the slots on dust off of objects.
the exhaust.Pull up on the exhaust
Using Your Vacuum
tab and push the top of the blower 1. Insert the power plug into the wall outlet.
port until it snaps into place. 2. Connect hose and telescopic tube if desired.
(Fig.14) 3. Correctly place shoulder straps on
each shoulder and secure the waist
band with hook and loop strips.
(Fig. 17)
Caution:
If the waist band and both
Fig.14 Shoulder straps are not properly and
4. To attach the hose to the blower Securely in place the umit could fall off
port,align the flexible hose and turn Your back causing damage or injury.
counter-clockwise until it stops.The
hose is now securely in place.
(Fig. 15)
Fig. 15 Fig. 17