9
Winding the bobbin
[1]
Pull the handwheel out.
[2]
Draw the thread from spool.
Guide the thread around the bobbin winder thread
guide.
[3]
Insert the thread through the hole in the bobbin
from the inside to the outside.
Put the bobbin on the bobbin winder spindle.
[4]
Push it to the right.
[5]
With the free end of the thread held in your hand,
depress the foot control.
Stop the machine when it has made a few turns,
and cut the thread close to the hole in the bobbin.
[6]
Depress the foot control again.
When the bobbin is fully wound, stop the machine.
Return the bobbin winder spindle to its original
position by moving the spindle to the left, and cut
the thread.
[7]
Push the handwheel to the left.
(original position).
NOTE:
Return the bobbin winder spindle when the
machine stops.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
Janome us2004 Instruction Manual
www.aaasewing.com
US2004 Owners Manual/ User Guide
