Janome TS200Q, Instruction Book

Page: 39 / 64

37
q
w
e
r
w
y
u
z x c v
Sewing a shorter darning
7RVHZDGDUQLQJVKRUWHUWKDQßFPÀUVWVWRSWKH
PDFKLQHDIWHUVHZLQJWKHUHTXLUHGOHQJWK
y
, then press
the reverse button
t
.
7KHUHTXLUHGOHQJWK
y
has been determined.
6WDUWWKHPDFKLQHDJDLQDQGFRQWLQXHVHZLQJXQWLOWKH
machine stops automatically.
t
Reverse button
y
5HTXLUHGOHQJWK
u
6WDUWLQJSRLQW
Sewing a same-sized darning
6LPSO\VWDUWWKHPDFKLQHWRVHZDQRWKHUGDUQLQJDWWKH
same size.
NOTE:
To reset the size of the darning, select the other stitch
pattern and reselect the darning stitch.
t
Starting to sew
z
Attach the automatic buttonhole foot R and pull the
button holder
q
all the way out.
Draw the needle thread to the left through the hole of
foot.
q
Button holder
x
Place the fabric under the foot, and lower the needle
at the starting point
w
. Then lower the foot.
w
6WDUWLQJSRLQW
c
6WDUWWKHPDFKLQH7KHPDFKLQHZLOOVHZORFNLQJ
stitch, 16 rows of darning, locking stitch again and
stop automatically.
v
Turn the fabric and repeat sewing in different direction.
e
ßFP
r
ßFP
Darning Stitch
q
6WLWFKSDWWHUQ 02'(
w
Thread tension dial: 3 to 6
e
Presser foot: Automatic buttonhole foot R
4
w e q
Adjusting the evenness of darning
Correct the evenness of the darning as follows:
“d5” is the default setting value.
When the right side of the darn is lower than the left side,
SUHVVWKH´µVLJQRQWKHVWLWFKOHQJWKDGMXVWLQJNH\
q
to
set the value to “d6” to “d9”, and make the darn even.
When the left side of the darn is lower than the right side,
SUHVVWKH´²µVLJQRQWKHVWLWFKOHQJWKDGMXVWLQJNH\
q
to
set the value to “d1” to “d4”, and make the darn even.
q
6WLWFKOHQJWKDGMXVWLQJNH\
q