Janome Skyline 55 Instruction Book Download Page 80

Page: 80 / 92

Deleting and Inserting a Pattern

Example: Deleting pattern “B” and inserting “W” from
“ABC”.

Enter “W”.

Pattern “W” will be inserted between “A” and “C”.

Duplicating a Pattern

Example: Duplicating a “W”.

Press the cursor key to shift the cursor under the
pattern to be deleted.

Move the cursor under the pattern “B”.

Press the clear key.

Pattern “B” will be deleted.

NOTE:
Pressing and holding the clear key will delete all the
programmed patterns and the LCD screen will return
to the display prior to programming.

Press the cursor key to shift the cursor under the

pattern to be duplicated.

Press the memory key and “W” will be duplicated after

the pattern “W”.

Press the memory key to memorize the new pattern
combination.

Summary of Contents for Skyline 55





























































































Search results

Summary of Contents for Skyline 55

Reviews:

Related manuals for Skyline 55

Brands by name

Popular brands

Janome Skyline 55, Instruction Book

Search results

Summary of Contents for Skyline 55

Reviews:

Related manuals for Skyline 55

Brands by name

Popular brands