Janome Sewist 780DC, Instruction Manual

Page: 27 / 68

25
Needle stop position setting
You can set the needle stop position to up or down when
the machine stops.
Enter the setting mode.
Press the “ ” of the arrow key
q
.
The default setting is down and “dn” mark is blinking.
z
To set the needle stop position to the up position,
press “+” of the stitch width adjusting key
w
, and the
“UP” mark will blink.
Auto-off timer
NOTE:
The auto-off timer is available in EU countries and
some regions which use 200 - 240 voltage standards.
The machine will be turned off if you do not use the
machine within the time period set by this timer.
Enter the setting mode.
Press “ ” of the arrow key
q
twice.
The setting screen “Auto-off timer” appears.
The default auto-off timer setting is 7 hours and “07” sign
w
appears on the screen.
z
Press “+” of the stitch length adjusting key
e
to
increase the setting value.
Press “+” of the stitch width adjusting key
r
to
decrease the setting value.
The auto-off timer can be set from 1 to 12 hours.
x
If you wish to turn off the timer, press and hold the “+”
of stitch length adjusting key
e
or stitch width adjusting
key until “oFF” mark
t
appears on the screen.
c
Press the start/stop button
y
to apply the setting.
x
To set the needle stop position to the down position,
press “+” of the stitch length adjusting key
e
, and the
“dn” mark will blink.
w
e
q
e q
w
e
t
y
r
r
z
x
c c
Press the START/STOP button
r
to apply the setting.
z
x
c