Janome Memory Craft 9450QCP, Instruction Book

Page: 114 / 124

112
Cleaning the Hook Area
Clean the hook area at least once a month.
z
Turn the power switch off and unplug the machine.
Remove the needle plate (refer to page 28).
Remove the needle and presser foot.
Take out the bobbin and bobbin holder.
q
Bobbin holder
x
Clean the bobbin holder with a lint brush.
Wipe the bobbin holder both inside and outside with a
soft cloth.
w
Lint brush
e
Soft cloth
c
Clean the feed dog and auto thread cutter device with
the lint brush.
r
Feed dog
t
Auto thread cutter device
v
Clean the hook race with a soft cloth.
y
Soft cloth
CARE AND MAINTENANCE
q
q
w
y
r
t
w
i
u
q
z
x
c
b
WARNING:
Turn the power switch off and unplug the machine
before cleaning.
Do not dismantle the machine in any way other than
as explained in this section.
CAUTION:
Do not store the machine in a high-humidity area,
near a heat radiator, or in direct sunlight. Store the
machine in cool dry place.
Clean the outside of the machine with a soft cloth.
Do not use chemical solvents.
v
b
Insert the bobbin holder so that the knob fits next to
the stopper in the hook race.
Insert the bobbin.
Attach the needle plate, presser foot and needle.
u
Knob
i
Stopper
e