64
Care of Your Machine
1
Screw driver
2
Set screw
3
Needle plate
4
Bobbin holder
5
Lint brush
6
Feed dogs
7
Hook race
8
Soft, dry cloth
Press the needle Up/down button to raise the needle and
unplug the machine before cleaning.
Do not dismantle the machine other than explained on
this page.
Do not store the machine in a high-humidity area, near a
heat radiator or in direct sunlight.
Clean the outside of the machine with a soft cloth and
neutral soap.
Cleaning the Hook Race and Feed Dogs
[1]
Remove the presser foot and needle. Remove the
screw on the left side of the needle plate with the
screwdriver supplied with the machine.
[2]
Remove the needle plate and take out the bobbin.
Lift up the bobbin holder and remove it.
[3]
Brush out dust and lint inside the bobbin holder.
[4]
Clean the feed dogs and the hook race with the lint
brush.
[5]
Clean the inside of the bobbin holder with a dry cloth
or a lint brush.
*
Wipe out gently with soft, dry cloth. You may also
use a vacuum cleaner.
Replacing the Bobbin Holder
1
Bobbin holder
2
Stopper
3
Knob
4
Needle plate guide pins
5
Screwdriver
6
Guide holes
[1]
Insert the bobbin holder so that the knob fits next to
the stopper in the hook race.
[2]
Insert the bobbin.
[3]
Replace the needle plate, inserting the two needle
plate guide pins into the holes in the needle plate.
Replace the screw.
[1]
[2]
[3]
[4]
[5]
[1]
[2]
[3]
SECTION V CARE OF YOUR MACHINE
1
1
2
3
4
5
6
2
3
4
5
4
5
6
7
8
