Janome Memory Craft 400E, Instruction Book

Page: 31 / 68

29
Moving a design
You can make fine adjustments to the position of the
embroidery design.
Press the angle/move key
!1
.
The jog keys appear on the screen.
Press the or keys
u
to move the design 0.5 mm
right or left (X window
o
).
Press the or keys
i
to move the design 0.5 mm
forward or backward (Y window
!0
).
The moving distance from the original position is shown
as coordinates in the X and Y windows.
NOTE:
The position of an embroidery design can be fine
adjusted from -5.0 mm to 5.0 mm.
The position of the embroidery design cannot be
adjusted to exceed the sewing area.
The moving distance from the original position is
shown only in millimeters.
Fine position/angle adjustment key
You can make fine adjustments to the position or angle of
the embroidery design without removing the embroidery
hoop from the machine.
Press the fine position/angle adjustment key
q
.
The original embroidery design position is previewed as
a rectangle
w
.
q
Rotating a design
You can make fine adjustments to the angle of the
embroidery design.
Press the key
r
to rotate the design 0.5 degrees
clockwise.
Press the key
t
to rotate the design 0.5 degrees
counterclockwise.
The angle value is displayed in the window
y
.
NOTE:
The angle of an embroidery design can be adjusted
from -5.0 to 5.0 degrees.
The angle of the embroidery design cannot be
adjusted to exceed the sewing area.
w
y
!1
t
The red rectangle
e
appears when you make fine
adjustments to the embroidery design, and it shows the
difference between the original position and the adjusted
position.
e
r
i
o
!0
u