6
CHANGING EXTERNAL PARTS
FRONT COVER
To remove:
1. Remove the face cover and bed cover (Refer to pages 4 and 5).
2. Remove the setscrews
q
(2 pcs.).
3. Loosen the setscrew
w
.
4. Loosen the setscrew
e
.
5. Loosen the setscrew
r
.
6. Remove the setscrew
t
.
7. Disengage the front cover and rear cover hooks.
8. Remove the front cover
y
.
9. Disconnect all the connectors from the circuit board A.
NOTE:
Do not disconnect the connectors by pulling cords. To disconnect, grasp the connector, not the cord.
To attach:
9. Follow the above procedures in reverse. See "PRINTED CIRCUIT BOARD A CONNECTION" (Page 23).
q
w
t
e
r
y