background image

6

e

 Auto-lock button

When stitch pattern #01, #05 or #10

              has

been selected, the machine will immediately sew
locking stitches and automatically stop when the
auto-lock button is pressed.
When sewing any other stitches, the machine will
sew locking stitches at the end of the pattern being
sewn and automatically stop.

w

 Reverse button

When sewing the stitch pattern #01, #05 or #10
the machine will sew in reverse as long as the
reverse button is pressed.
If you press the reverse button when sewing any
other stitches, the machine will immediately sew
locking stitches and automatically stop.

If you press the reverse button when stitch pattern

#01, #05 or #10                 has been selected and the

foot control is not connected, the machine will start
sewing in reverse as long as the button is pressed
and the machine will stop when the button is
released.

r

 Up/down needle button

Press this button to bring the needle up or down.
The machine will stop with the needle up or down
depending on the needle position determined by this
button.

q

 Start/stop button

Press this button to start or to stop the machine.
The machine will run slowly as long as this button is
pressed, and will start running at the speed set by the
speed control lever, or stop when the button is
released.

NOTE:
The start/stop button does not work when the foot
control is connected.

r

e

w

q

Function Buttons

Summary of Contents for JP760 -















































Reviews: