7
Machine Operating Buttons
1
Start/stop button
Press this button to start or stop the machine.
The machine starts running slowly for the first few
stitches, it then runs at the speed set by the speed
control slider. The machine runs slowly as long as this
button is pressed.
The button will turn red when the machine is running,
and green when it has been stopped.
Pressing and holding this button while sewing will slow
down the sewing speed and the machine will stop
when the button is released.
NOTE:
The start/stop button cannot be used when the foot
control is connected to the machine.
The machine will not start if the presser foot is up and
the LCD screen shows message
(A)
or
(B)
.
Lower the presser foot and start the machine.
2
Reverse button
When sewing pattern number D1S, D1, D4, 9-11, 93 or
151-154 the machine will sew in reverse as long as the
reverse button is pressed.
If you press the reverse button when sewing any other
patterns, the machine will immediately sew locking
stitches and automatically stop.
When the foot control is not connected and pattern
D1S, D1, D4, 9-11, 93 or 151-154 is selected, the
machine will sew in reverse at the slowest speed as
long as the reverse button is pressed.
3
Auto-lock button
When sewing pattern number D1S, D1, D4, 9-11, 93 or
151-156, the machine will immediately sew locking
stitches and automatically stop when the auto-lock
button is pressed.
When sewing all other patterns, the machine will sew
to the end of the current pattern, sew locking stitches
and stop automatically.
3
2
1
(A)
(B)
Summary of Contents for Horizon Memory Craft 7700
Page 95: ......
