14
3 Hold the thread at both ends and tug gently to
ensure the thread is correctly inserted between
the tension disks. ( If the presser foot lifter is
raised, the thread easily inserts between the
tension disks.)
e
Tension dial
r
Tension disks
4 Pass the thread through the looper thread guide (A)
from the right.
t
Looper thread guide (A)
5 Pass the thread through the eyes of the looper
take-up levers.
y
Looper take-up lever
NOTE:
Be sure to raise the needles to the highest position so
the eyes of the looper take-up levers will align.
6 Slip the thread behind the looper thread guide (B)
from the right.
u
Looper thread guide (B)
7 Pull the looper release knob and the looper will slant
to the right for easy access.
i
Looper release knob
8 Pass the thread through the eye of the looper thread
guide (D) then through the eye of looper.
Draw the thread end 4” (10 cm) to the back.
o
Looper thread guide (D)
!0
Eye of the looper
NOTE:
You may use a pair of tweezers.
9 Push the looper in the direction of the arrow, back to
the original position.
3
4
5
6
7
8
9
e
t
y
i
u
!0
o
r
Summary of Contents for COVER PRO 1000CP
Page 1: ...INSTRUCTION BOOK COVER PRO 1000CP...
Page 3: ......
