48
Adjustment of Cutting Width
When the cutting width is too narrow or too
wide in relation to the seam width, adjust it
as follows:
1 Turn off the power switch and unplug the
machine.
2 Open the looper and side covers.
3 Turn the cutting width adjusting dial to move
the cutting blades to the desired position.
If the cutting width is too narrow, turn the
cutting width adjusting dial clockwise.
The lower knife will move right.
If the cutting width is too wide,turn the cut-
ting width adjusting dial counterclockwise.
The lower knife will move left.
4 Close the looper and side covers.
1 Cutting width adjusting dial
2 Lower knife
3 Standard setting
1
2
2
3
Summary of Contents for CompuLock
Page 1: ...INSTRUCTION BOOK CompuLock...
