JMA11967
AVAILABLE FROM YOUR EXPERT JANOME RETAILER
8002
DX
8002 DX Features
AUSTRALIA
Janome Australia Pty Ltd.
PO Box 1383, Moorabbin 3189 Victoria
www.janome.com.au
NEW ZEALAND
Janome Sewing Machine Co. (NZ) Ltd.
PO Box 51009, Pakuranga, Auckland 2140
www.janome.co.nz
Presser foot pressure adjustment
Cutting width: 3.1 mm - 7.3 mm
Stitch length: 1 - 4 mm
Differential feed ratio: 0.5 - 2.25
Easy 2-step upper knife engagement
Instant rolled hem conversion with chaining finger
Built-in thread cutter
Colour-coded threading path with diagram
3/4 thread overlocking
4 bonus attachments
Instructional DVD
Differential Feed
The differential feed device is designed to prevent
fabrics from puckering or stretching. Both stitch length
and differential feed dials can be set at any time, even
while sewing.
Easy Rolled Hem Change-Over
No need to change the needle plate for rolled hemming.
Just slide the needle plate setting knob to “R” position to
convert the plate for rolled hemming.
Adjustable Cutting Width
Depending on the type or thickness of the
material you sew, the seams may be too
loose or too tight even when the tensions
are correctly adjusted. In these cases, you
can easily adjust the cutting width with this
dial to correct the seam tension.
Bonus Attachments
• Gathering attachment
• Elastic attachment
• Blind stitch foot
• Cording foot
nts
ment
nt
