background image

44

Fagoting

q

  Stitch pattern:  

 

43

w

  Needle thread tension: 

3 to 6

e

  Presser foot:  

 

Satin stitch foot F

* Stitch patterns  

 

can also be used.

Use this stitch to join two pieces of fabric to create an 
open work appearance and add design interest.
Fold under each fabric edge 1.5 cm and press. Pin the two 
edges to paper or tear away backing 0.3 to 0.4 cm apart. 
Sew slowly, guiding the fabric so the needle catches the 
folded edge on each side.
After finishing the sewing, tear away the paper.
 

q

 0.3 to 0.4 cm

 

w

 Paper

q

w

Satin Stitches

q

 Stitch pattern:  

     48

w

  Needle thread tension:  3 to 6

e

 Presser foot:  

    Satin stitch foot F

   

   Open toe satin stitch foot F2

* Stitch patterns  

 

can also be used.

For better sewing results, stabilizer should be used on 
the wrong side of the fabric when you use stretch or 
elastic fabrics.
Press the auto-lock button to finish the end of the pattern.

q

e

w

q

e

w

q

e

w

Clasp Stitch

q

  Stitch pattern:  

 

33

w

  Needle thread tension: 

3 to 6

e

  Presser foot:  

 

Satin stitch foot F

z

  Select stitch pattern 33. Press the auto-lock button 

  and start sewing.

Machine will sew one unit of pattern 33 and stop  

 

 automatically.

Summary of Contents for 5060DC

























































Reviews: