9
Threading the Machine
Raise the take–up lever to its highest position by turning the
handwheel toward you.
Raise the presser foot.
Place a spool on the spool pin as shown, with thread coming
from back of the spool.
1
Draw the thread into thread guide.
2
While holding the thread near spool, draw thread down
into the tension area and then around the check spring
holder.
3
Firmly draw the thread up and through the take–up
lever from right to left.
4
Then draw the thread down and slip it into the lower
thread guide.
5
Draw the thread down and slip it into needle bar thread
guide on the left.
6
Thread the needle eye from front to back.
Note :
You may want to cut the end of thread with sharp
scissors for easier needle threading.
1
3
2
4
5
6
1
2
3
4
5
6
*
Refer to page 10 for the built-in needle threader.
Summary of Contents for 419S
Page 1: ...Models 419S 423S...
Page 34: ...Printed in Taiwan 303 800 051...
