Page 21
Measured value indication
Once in a second all measured values are cal-
culated and can be indicated on the display.
Two methods are available for calling up the
measured value indications (see table 1).
- The selection of measured value indications
via the keys 1 and 2, herein called
measured
value selection
.
- The automatically rotating indications of se-
lected measured value indications, herein
called
measured value rotation
.
A
measured value rotation time
has be pro-
grammed additionally for the measured value
rotation.
All mesured values for the measured value se-
lection are preset by the manufactures. For the
automatic rotation nothing is preset by the
manufacturer. The rotation time is preset with 0
seconds.
Programming
In programming mode please scroll to the
menu measured value rotation, by using key 2.
Confirm selection with key 1.
The first digit of the rotation time flashes and
can be changed by pressing key 2. By pressing
key 1 again the next digit will be selected and
flashes.
If no digit flashes anymore, you can shift to pro-
gramming menu „
Measured value selection“
by
pressing key 2.
PRG
L1
L2
L3
S
Rotation time in seconds indicated
Measured value rotation time
Both methods are available simultaneously.
The measured value rotation is programmed, if
at least one measured value indication and one
measured value rotation time bigger than 0
seconds is programmed. If no key is pressed
for about 60 seconds, an automatical change
to rotation mode will be carried out, and all pro-
grammed measured values will be indicated
one after the other.
Setting range of measured value rotation time:
0 .. 250 seconds
If 0 seconds are programmed, no rotation will
be carried out. Nevertheless, measured value
indications which are not programmed in the
measured value selection
, can be used for
measured value rotation.
Abb.
