www.janitza.de
9
7” Touch Display
3. Product description
3.1
Product description
This product is part of a customer-specific com-
plete solution. It serves as a user interface and
operator interface for the configuration and param-
etrization of the AHF/SVG modules.
For more information on the complete solution,
please refer to the corresponding usage informa-
tion.
3.2
Intended use
The device is:
·Intended for installation in control cabinets.
·Not intended for installation in vehicles! Use of
the device in non-stationary equipment consti-
tutes an exceptional environmental condition and
is only permissible by special agreement.
·Not intended for installation in environments with
harmful oils, acids, gases, vapors, dusts, radia-
tion, etc.
·Not to be exposed to direct sunlight and inadmis-
sible climatic conditions, such as rain.
3.3
Incoming goods inspection
Safe and trouble-free operation of this product and
its components presupposes proper transport,
proper storage, set-up and assembly as well as
operation and maintenance in addition to com-
pliance with the safety information and warning
notices.
Exercise due caution when unpacking and packing
the device, do not use force and only use suitable
tools.
Before mounting and installing the product, please
check
·Its flawless mechanical condition by visual in-
spection.
·The scope of delivery for completeness.
If it can be assumed that safe operation of the
product is no longer possible:
·Disconnect the product from operation immedi-
ately!
·Secure the product against being switched on
again!
It can be assumed that safe operation is no longer
possible, for example, if the device:
·Has visible damage.
·No longer functions despite an intact power
supply.
·Was subjected to extended periods of unfavor-
able conditions (e.g. storage outside of the per-
missible climate thresholds without adjustment to
the room climate, condensation, etc.) or transport
stress (e.g. falling from an elevated position, even
without visible external damage, etc.).
CAUTION
Malfunction, damage or risk of injury due to
improper connection of the device and its com-
ponents.
Improperly connected devices can deliver incorrect
measured values, damage the device or pose a risk
of injury to persons.
Observe all
·
usage information on the device and its com-
ponents!
·
Switch off your installation before commenc-
ing work! Secure it against being switched on!
Check to be sure it is de-energized! Ground
and short circuit! Cover or block off adjacent
live parts!
3.4
Scope of delivery
Item
Scope of delivery (designation)
1
7” TFT color touch display
2
Fastening material