Installationsanvisning Janfire Flex - a
IA Brännare Flex-a R2 SV
Janfire 2009
9(19
)
Figur 2 Function description
3.1 Pellet burner Flex-a
1. Control panel is easily available and simple to use. It needs only a pressure on button
in order to start or to shut down. Automatic adaptation to summer or winter relation
gives best efficiency. Burner output can be adjusted after season, the building's size
and heat consumption. will be adjusted during installation. Burner output can thereby
easy be changed for most effective operation.
2. Good combustion with high efficiency and low wastes are achieved through that a
small internal auger be able precisely dose to the burner. Due to dosage auger can
pellet transport happen directly from bigger stores.
3. Automatic ignition.
4. Combustion Chamber is designed so that minimally with fuel submits the combustion
zone without to have been burnt up totally. None pellet ”spills over” and ports in the
boiler. Combustion Chamber is produced of heat-resistant stainless steels.
5. The combustion plate is very easy to lift out and clean.
