JANE nanuq twin, Instructions Manual

Page: 24 / 112

24
NANUQ TWIN
To adjust it press button A. 5
WARNING: When the brake is on make sure that the pushchair
has braked correctly. It may be necessary to push the pushchair
slightly for the brake to be fully activated.
1.- UNFOLDING THE PUSHCHAIR
2.- SWIVEL WHEELS
5.- ADJUSTING THE HEIGHT OF THE HANDLE
Your pushchair has 4 possible positions. Your pushchair has
4 positions. Pull the levers found on the top rear part of the
backrests and adjust the pushchair to the required position.
6
6.- ADJUSTING THE BACKREST
Your pushchair has front swivel wheels or the steering can be
locked if required.
To lock the wheels, press the button behind each front wheel
bearer downwards.
2
To unlock the steering, push the button upwards.
3.- USING THE PARKING BRAKE
PUTTING THE BRAKE ON: Push the lever downwards. 3.1
TAKING THE BRAKE OFF: Pull the lever upwards. 3.2
4.- SEAT BELT
Adjust the seat belts to fit the children whenever they use
the pushchair.
4
The two side fastening points of the seats can be used to at-
tach an additional harness.
Your pushchair is approved for new born babies. To fit the
belts on your baby when he is under 6 months old, pass the
shoulder straps through the lower holes and fasten the shoul-
der protector pads using the Velcro.
4B When your child is over 6 months old, pass the straps
through the holes that are most comfortable for the child.
There are two possible positions. To lower it, press A. 7
7.- ADJUSTING THE FOOTREST
WARNING: It is important to make sure that the child is kept
away from the pushchair while it is being folded or unfolded.
WARNING: The appearance of cutting, compression and pinch
points are inevitable during these operations.
Release the levers found on the sides. 1.1
Pull the handlebar upwards unfolding the pushchair. 1.2
Lastly, press the back pedals down as shown in figure. 1.3