background image

Page 2

Before starting the installation, check Table 1 to identify each of the 

parts required for this installation. If any parts are missing from the 

kit, please call your local distributor for assistance.

  

WARNING/SHOCK HAZARD

Turn off all switches and the main breaker in the pool/spa heater electrical circuit 

before starting the replacement procedure. Failure to comply may cause a shock 

or hazard resulting in severe personal injury or death.
While disconnecting and/or connecting any electrical wiring in the appliance, be 

careful not to damage or abrade any of the wiring.

FOR YOUR SAFETY: 

This product must be installed and serviced by a contractor 

who is licensed and qualified in pool equipment by the jurisdiction in which the 
product will be installed where such state or local requirements exists. In the event 
no such state or local requirement exists, the installer or maintainer must be a 
professional with sufficient experience in pool equipment installation and maintenance 
so that all of the instructions in this manual can be followed exactly. Before installing 
this product, read and follow all warning notices and instructions that accompany 
this product. Failure to follow warning notices and instructions may result in property 
damage, personal injury, or death. Improper installation and/or operation can create 
carbon monoxide gas and flue gases which can cause serious injury, property 
damage, or death. For indoor installations, as an additional measure of safety, Zodiac 
Pool Systems, Inc. strongly recommends installation of suitable carbon monoxide 
detectors in the vicinity of this appliance and in any adjacent occupied spaces. 
Improper installation and/or operation will void the warranty.

 WARNING 

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this 
or any other appliance.
WHAT TO DO IF YOU SMELL GAS
  •  Immediately switch off main gas supply.
  •  Do not try to light any appliance.
  •  Do not touch any electrical switch; do not use any phone in your building.
  •  Immediately call your gas supplier from a neighbor’s phone. Follow the gas 

supplier’s instructions.
  •  If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency or the 

gas supplier.

Summary of Contents for JXi R0591900

Page 1: ...REVC JXi Gas Fired Pool Spa Heater Spare Parts Installation Instructions These instructions are to be used with the following Jandy Pro Series spare parts kits R0591900 User Interface Control Kit User Interface ...

Page 2: ...can be followed exactly Before installing this product read and follow all warning notices and instructions that accompany this product Failure to follow warning notices and instructions may result in property damage personal injury or death Improper installation and or operation can create carbon monoxide gas and flue gases which can cause serious injury property damage or death For indoor instal...

Page 3: ...g the terminal screws see Figure 1 d L1 F1 ACN1 ACH1 L2 F2 G R BK 240 VAC HEATER POWER SUPPLY BLOWER MOTOR W BK BL R O IGNITION CO F1 F2 24 VAC IGN 120 L1 L2 IGN FS BK W BK BL R GY BK 24 VAC R Y HOT SURFACE IGNITER W GY W FLAME SENSE TRANSFORMER B WATER TEMP GAS VALVE USER INTERFACE1 BK O BL R HIPRESS HILIMIT LOPRESS FUSELINK WATER PRESS REMOTE SPA POOL COM REV VALVE 24VAC PUMP COMP IGN FAN LOUVER...

Page 4: ... Vista CA 92081 1 800 822 7933 www ZodiacPoolSystems com Zodiac Pool Systems Canada Inc 2115 South Service Road West Unit 3 Oakville ON L6L 5W2 1 888 647 4004 www ZodiacPoolSystems ca Assembly 1 Connect wires from the terminal block to the new user interface black orange blue and red and secure by tightening the terminal screws see Figure 1 2 Place the user interface securely in the heater housing...

Reviews: