- 2 -
nVIDIA NF520LE User Manual
4.5.6 Integrated Peripherals
►
IDE Function Setup
Click <Enter> key to enter its submenu:
Phoenix - Award WorkstationBIOS CMOS Setup Utility
Integrated Peripherals
►
IDE Function Setup
►
RAID Config
OnChip USB
USB Memory Type
USB Keyboard Support
PCIE Lan Control
HD Audio
MAC Lan
MAC Media Interface
IDE HDD Block Mode
POWER ON Function
x KB Power ON Password
x Hot Key Power ON
Onboard FDC Controller
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x EPP Mode Select
x ECP Mode Use DMA
PWRON After PWR-Fail
[
Press Enter
]
[Press Enter]
[V1.1+V2.0]
[Base Memory(640K0]
[Enabled]
[Enabled]
[Auto]
[Auto]
[Pin Strap]
[Enabled]
[BUTTON ONLY]
Enter
Ctrl-F1
[Disabled]
[3F8/1RQ4]
[378/IRQ7]
[SPP]
EPP1.7
3
[Off]
Item Help
Menu Level
►
↑
↓
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Press Enter
Phoenix - Award WorkstationBIOS CMOS Setup Utility
IDE Function Setup
OnChip IDE Channel0
Primary Master PIO
Primary Slave PIO
Primary Master UDMA
Primary Slave UDMA
IDE DMA transfer access
Serial-ATA Controller
IDE Prefetch Mode
[
Enabled
]
[Auto]
[Auto]
[Auto]
[Auto]
[Enabled]
[All Enabled]
[Enabled]
Item Help
Menu Level
►►
↑
↓
→←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enabled
OnChip IDE Channel0
The mainboard chipset contains a PCI IDE interface with support for two IDE channels.
Select “Enabled” to activate the first and/or second IDE interface. Select “Disabled” to
deactivate an interface if you are going to install a primary and/or secondary add-in IDE
interface.
Primary Master/Slave PIO
Each IDE channel supports a master device and a slave device. These four items let you
assign the kind of PIO (Programmed Input/Output) were used by the IDE devices.
Choose
Auto to let the system auto detect which PIO mode is best, or select a PIO mode
from 0-4.
