- 2 -
JW-H61M-L3 User's Manual
Press < ESC> key to return to the Advanced menu
• AC Power Loss
Setting the system state choice after powre failure. Setting "Always Off", need to press case
panel on the Power switch to boot. Setting "Always On", the supply reply directly boot.
Setting "Keep last state", Power reply recovery system State before power off.
The default value as "Always Off".
• USB KB/MS WakeUp S3/S4
support USB S3/S4 wakeup,optional for Disabled,Enabled.
• Wake By PME
Network control of awakening. optional for Disabled,Enabled.
►
H/W Monitor
Aptio Setup Utility - Copyright (C) 2011 American Megatrends,Inc.
Advanced
PC Health Status
CPU temperature
SYS temperature
CFAN1 Speed
SFAN1 Speed
CPU Voltage
DIMM Voltage
VTT Voltage
PCH Voltage
VBAT Voltage
Smart CFan Configuration
: +45
o
C
: +30
o
C
: 2276 RPM
: N/A
: +1.192 V
: +1.512 V
: +1.040 V
: +1.024 V
: +3.264 V
[Disabled]
Smpart Fan Configuration
→ ←
: Select Screen
↑↓
:
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F7: Previous Values
F8: Fail-Safe Values
F9: Optimized Defaults
F10: Save & Exit
ESC: Exit
Version 2.11.1210. (C)Copyright 2011 American Megatrends, Inc.
Teh itim monitor hardware the current working state., including the CPU temperature,
fan speed and kinds of voltage, etc.
•
Smart CFan Confguration
Smart Fan Configuration. Options: Disabled, Enabled.
There will be three options for Enable:
Full Speed Temp
(℃),
Target Temp Value
(℃)
and StartUp Level
Full Speed Temp
(℃)：
Min 40,Max 80
Target Temp Value
(℃)：
Min0,Max 40
StartUp Leve
l：
Low
、
Middle
、
Fast.
When the temperature of CPU is below or equal to Target Temp Value
(℃),
fan will rotate at
Start Up Level.
When the temperature of CPU is higher than Target Temp Value
(℃)
and below Full Speed
Temp
(℃)
, the speed of fan will be faster beginning from the Start Up Level as the temperature
of CPU increasing. When the temperature of CPU is higher than or equal to Full Speed Temp
(℃),
fan will rotate at full speed.
