- 2 -
AMD Series User's Manual
4.5.6 Security Setting
This item allows you to
Chage Supervisor/User Password, Type the password, up to eight
characters, and press <Enter>. The password typed now will clear any previously entered
password from CMOS memory. You will be asked toconfirm the password. Type the password
again and press <Enter>.
Note
:
Don’t forget your password. If you forget the password, you will have to
open the computer case and clear all information in the CMOS before you can start
up the system. But by doing this, you will have to reset all previously set options.
4.5.7 Power Setting
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Power
JUSTw00T!
Exit
Security Settings
Install or Change the
password.
←
Select Screen
↑
↓
Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
BIOS Sector Virus Protection
[Disabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
Advanced
Boot
Security
Power
JUSTw00T!
Exit
Power Settings
Section for Advanced
APM Configuration.
←
Select Screen
↑
↓
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
►
APM Configuration
►
PC Health
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
►
APM Configuration
Click <Enter> key to enter its submenu, APM Configuration Template Manager allows
you to manage Power Managerment default or custom configuration templates.