J&W Intel P43 Series, User Manual, Page: 20 / 37

- 1 -
Intel P43 Series User's Manual
BIOS SETUP UTILITY
Main
AHCI Settings While entering setup,
BIOS auto detects the
presence of IDE
devices. This displays
the status of auto
detection of IDE
devices.
←
Select Screen
↑ ↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
AHCI BIOS Support [Enabled]
AHCI CD/DVD Boot Time out [35]
►
AHCI Port0 [Not Detected]
►
AHCI Port1 [Not Detected]
►
AHCI Port2 [Not Detected]
►
AHCI Port3 [Not Detected]
►
AHCI Port4 [Not Detected]
►
AHCI Port5 [Not Detected]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
BIOS SETUP UTILITY
Main
AHCI Port0 Select the type
of device connected
to the system.
←
Select Screen
↑ ↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Device :Not Detected
SATA Port0
S.M.A.R.T.
[Auto]
[Enabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
•
LBA/Large Mode
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the device
supports this mode, and if the device was not previously formatted with LBA mode disabled.
• Block (Multi-Sector Transfer)
Enables or disables data multi-sectors transfers. When set to [Auto] , the data transfer from
and to the device occurs multiple sectors at a time if the device supports multi-sector transfer
frature. When set to [Disabled] , the data transfer from and to the device occurs one sector at
a time.
•
PIO Mode
Allows you to select the data transfer mode.
• DMA Mode
Selects the DMA mode.
• S.M.A.R.T
Set the Smart Monitoring, Analysis, and Reporting Technology.
•
32Bit Data Transfer
Enables or disables 32-bit data transfer.
・ Press < Esc > key to return to " Main " menu.
►
AHCI Device
This menu is the secton for AHCI configuration.
• AHCI BIOS Support
Enables for supporting.
•
AHCI CD/DVD Boot Time out
Selects the boot time out value for AHCI CD/DVD devices.
►
AHCI Port0~5
Displays the status of auto-detection of SATA devices.