- 2 -
AMD 790GX User's Manual
•
Azalia snoop
Available options: Disabled, Enabled
•
HD Audio Azalia Device
Sets the HD Audio has Enabled or Disabled state.
•
HD Onboard PIN Config
Enabled : Display the option for Azalia Front Panel in BIOS.
Disabled: Disabled the option for Azalia Front Panel in BIOS.
•
Azalia Front Panel
Sets the sound function for front panel Enabled or Disabled.
•
OnChip SATA Channel
This item allows users to enable or disable the SATA controller.
•
OnChip SATA Type
Enables or disables RAID for the SATA controller or configures the SATA controller to AHCI
mode.
IDE: Disables RAID for the SATA controller and configures the SATA controller to PATA mode.
AHCI: Configures the SATA controller to AHCI mode. Advanced Host Controller Interface(AHCI)
is an interface specification that allows the storage driver to enable advanced Serial ATA
features such as Native Command Queuing and hot plug.
RAID/IDE: Enables RAID for the SATA controller. (The IDE controller still operates in PATA
mode.)
•
SATA IDE Combined Mode
Available options: Disabled
，
Enabled
•
PATA Channel Config
Available options: SATA as primary
，
SATA as secondary
・
Press <
Esc
> key to return to "
Advanced
" menu.
►
Onboard Device Configuration
Click <Enter> key to enter its submenu.
BIOS SETUP UTILITY
Advanced
Onboard Devices Configuration
DISABLED: disables the
integrated
IDE Controller.
PRIMARY: enables only
the Primary IDE
Controller.
SECONDARY: enables
only the Secondary IDE
Controller.
BOTH: enables both IDE
Controllers.
←
Select Screen
↑
↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
OnBoard PCI IDE Controller
Hard Disk Write Protect
IDE Detect Time Out (Sec)
ATA(PI) 80Pin Cable Detection
OnBoard Floppy Controller
Serial Port1 Address
Serial Port2 Address
Serial Port2 Mode
IR I/O Pin Select
IR Duplex Mode
Lan Controller
Onboard Lan Boot Rom
[Both]
[Disabled]
[35]
[Host & Device]
[Enabled]
[3F8/IRQ4]
[2F8/IRQ3]
[IrDA]
[SINB/SOUTB]
[Half Duplex]
[Enabled]
[Disabled]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
These options allow you to Enabled/Disabled for IDE,Floppy Controller, onboard LAN Control
set the addresses for Serial Port1& Port2.
•
Serial Port 1/2 Address
Enables or disables the first serial port and specifies its base I/O address and corresponding
interrupt.
•
Lan Controller
This option allows you whether enable the onboard LAN.
