Jands Stage CL, User Manual

Page: 46 / 72

Editing the Cuelist Cuelists
Setting a Cue Fade time
When you record a cue it is automatically set to the default cuelist fade time. If
you want to change the fade time for a cue you do this:
1.
On the Cuelist window press the ‘Cuelist’ tab button. Stage CL displays the
Cues list.
2.
Touch in the fade column of the Cue you want to change or hold shift and
rotate the touchscreen dial until the fade setting is highlighted then press
down on the touchscreen dial. The field changes colour to indicate that you
are editing it.
3.
Rotate the touchscreen dial to set a fade time in seconds.
When you play this cue it will now fade in over the time you have set.
Â
You can change the default Cuelist fade time in the Setup > Preferences
window.
See Preferences on page 11-3
Copying a Cue
You can copy and paste a cue to another location in the cuelist. To do this:
1.
Press the ‘Cuelist’ tab button. Stage CL displays the Cuelist list window.
2.
Touch the name of the Cue you want to copy or rotate the dial until the cue
name is highlighted.
3.
Touch the ‘Copy’ button at the bottom of the touchscreen.
4.
To replace an existing cue touch on a cue name and press Paste OR
5.
To insert a new cue touch on the cue after the location you want to insert and
touch Insert.
Updating a Cue
To update a cue you do this:
1.
Play the cue you want to update.
2.
Use the fixture faders and colour controls to change the look of the cue.
3.
Presss the ‘Cuelist’ tab button. Stage CL displays the Cuelist list window.
4.
Touch the name of the Cue you want to update or rotate the dial until the
cue name is highlighted.
5.
Touch the ‘Update’ button at the bottom of the touchscreen. Stage CL
displays the update confirmation window.
6.
Press Yes to complete the change.
8 ‐ 4 Stage CL User Guide, Version 0.4