manualshive.com logo in svg

Jands SNVR-8004ST, User Manual

Share
Download
Jands SNVR-8004ST User Manual Download Page 15

 
 

- 12 - 

 

11.2 System 

Upgrade 

Right click mouse, click

【

Setting

】

System

Update,

insert the USB storage device into the NVR, click

 

Browse 

to find the upgrade file, and click

 Upgrade.

 

Upgrade include firmware upgrade, boot screen image upgrade, and patch upgrade. 

Except USB memory upgrade, it also support to be upgraded by network. 

Note: 

When the NVR is upgrading, 

DO NOT

 perform any other operations or power off it, 

otherwise the NVR will fail to enter the system , and have to be send back to factory for repairing. 

After upgrading, please reboot the device. 

 

11.3 Import/Export 

Configuration 

Right click mouse

，

choose

【

Setting

】

System

Recovery Configuration

。

 

Import and Export configuration are used to handle these two situations: 

1.After the firmware is upgraded, restore the settings to default.   

2.To connect different IP Cameras and keep the other 

irrelevant 

settings. 

 

 

 

 

Summary of Contents for SNVR-8004ST





















Reviews:

No comments

Brands by name

Popular brands

Load more brands