2
COMPLIANCE
This product is approved for use in Australia/New Zealand and conforms to the following
standards:
Standards
IEC55103-1 (Emission)
IEC55103-2 (Immunity)
IEC60065 (Safety)
To ensure continued compliance with EMC Directive 89/336 and the Australian Radio-
communications Act 1992, use only high quality data cables with continuous shield, and
connectors with conductive back shells.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
DISCLAIMER
Information contained in this manual is subject to change without notice and does not
represent a commitment on the part of the vendor. JANDS Pty Ltd shall not be liable
for any loss or damage whatsoever arising from the use of information or any error
contained in this manual.
It is recommended that all service and repairs on this product be carried out by JANDS
Pty Ltd or its authorised service agents.
JANDS products must only be used for the purpose they were intended by the manu-
facturer and in conjunction with this operating manual.
JANDS Pty Ltd cannot accept any liability whatsoever for any loss or damage caused
by service, maintenance or repair by unauthorised personnel, or by use other than that
intended by the manufacturer.
Designed in Australia
JANDS PTY LTD
ACN 001 187 837
40 Kent Rd
Mascot NSW 2020
Sydney Australia
Locked Bag 15
MASCOT NSW 1460
Sydney Australia
P
: +61-2-9582-0909
F
: +61-2-9582-0999
E
W
: www.jands.com.au
JANDS
PTY LTD 2010
All rights reserved
Revision 1.1
06 May 2011
