background image

 

10

3-5-1 The Backing Up Procedures 

1.

 

Before you start to back up the video files, make sure that the back up program has 
detected the IDE/SCSI burning devices. If not, please check if the device is installed 

properly and click 

  to rescan the device. After that, the device still can not be 

detected, please verify if the device is ok.   

             

2.

 

Erase (Blank) the Disk

:

 

If CD-R/RW or DVD+R/RW or DVD-R/RW is used, the icon 

  will lighten after 

you insert the disk to the recorder.   

a. Click 

on    to start the erasing process.     

b. 

After it is done, the Message area will display “Done”.   

 

 

 

 
 
3.

 

Select the files to back up

Expand the hard drive directories in the left of the screen. Drag the mouse to select the 
recording files for backup (by Year, Month, Date) as shown in the following figure.   

 

       
4.

 

Click 

  to move these files to the right side of the screen for burning to the burning 

✍ 

If CD-R is used, you do not need to execute this process. 

Summary of Contents for Hyper Vision DHV-1640 series





















































































Reviews: