9
Safety Decals
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Replace Immediately If Damaged or Missing
IMPORTANT:
Install new safety signs if the
old signs are destroyed, lost, painted over
or cannot be read. When parts are replaced
that have safety signs, make sure you install
a new sign with each new part. New signs
are available from the manufacturer or your
authorized dealer.
1
2
3
4
5
10
11
6
7
8
9
DO NOT ENTER GRAIN TANK WHEN
AUGER IS RUNNING.
1
9
3
7
7
5
2
9
16
9
9
12
13
12 & 13
14
15
16
SERIOUS INJURY OR DEATH CAN RESULT
FROM CONTACT WITH ELECTRIC LINES.
USE CARE WHEN MOVING OR OPERATING
THIS MACHINE NEAR ELECTRIC LINES
TO AVOID CONTACT.
KEEP HANDS, FEET, HAIR AND
CLOTHING AWAY FROM MOVING PARTS
ROTATING DRIVELINE
CONTACT CAN CAUSE DEATH.
KEEP AWAY!
• Keep all guards in place when operating.
• Do NOT stand on steps or climb ladder until
all power is shut off.
• Keep hands, feet, hair and clothing away
from moving parts.
10
6
4
11
7
5
16
9
12
15
14
13
Do not inflate tires more than 6 PSI over the recommended
pressure printed on the side of the tire.
CHECK TIRE INFLATION
OPERATING INSTRUCTIONS
Do not operate or service machine until you
read and understand operator’s manual.
Dealer or manufacturer is not responsible for damaged caused by
loose wheel nuts.
CHECK ALL WHEEL NUTS
To prevent serious injury or death:
• R elieve pressure on system before
r
epairing, adjusting or disconnecting.
• W ear proper hand and eye protection
w
hen searching for leaks.
• K eep all components in good repair.
HIGH-PRESSURE FLUID HAZARD
Do not adjust, service, clear, or lubricate the machine until all
power is shut off.
Keep all safety shields in place.
Keep people and objects clear of equipment before applying
power or moving machine.
Before highway travel, secure a slow-moving vehicle emblem to
the rear of the machine in accordance to the state and local
laws.
Make sure all flashers and turn/brake lights are working properly
BEFORE
incidental highway travel.
•
•
•
•
•
•
FLOWING GRAIN TRAPS AND SUFFOCATES VICTIM IN SECONDS!
With the gate indicator in the closed position, fill the box with
grain.
With the PTO disengaged, fold discharge auger to upright
position.
After auger is in the upright position, start the PTO at a
SLOW
RATE OF SPEED
until the pin on the upper auger engages the
drive dog on the bottom auger(failure to follow this procedure
may cause extensive damage to both the drive dog and the pin).
Increase PTO speed to 1000 RPM and open inner gate until the
pointer is in the halfway position. When grain begins flowing
from the discharge auger, open gate to the full position.
Once the grain has ceased to flow, return the gate to the closed
position (for complete clean-out, gradually close gate, allowing
the opening to be reduced). Disengage the PTO and allow its
rotation to come to a complete stop. Auger is now ready to be
returned to the lowered position.
•
•
•
•
SERIOUS INJURY OR
DEATH CAN RESULT WITH
ELECTRIC LINES.
USE CARE WHEN MOVING
OR OPERATING MACHINE
NEAR ELECTRIC LINES TO
AVOID CONTACT.
NEVER PLAY IN OR
ON GRAIN CART
YOU CAN DIE IN
SECONDS IN
FLOWING GRAIN!
JM0037665
KEEP HANDS AND CLOTHING
AWAY FROM MOVING PARTS.
JM0076817
CHECK WHEEL LUGS
CHECK BEFORE EVERY SEASON.
Manufacturer is
NOT
responsible for damage
from loose lug nuts.
JM0025435
CHECK PTO OVERLAP
CHECK MANUAL FOR PTO LENGTH.
INCORRECT PTO OVERLAP MAY CAUSE
EXTENSIVE DAMAGE TO DRIVE SYSTEM.
Description
Part No.
1
Danger_Warning_Important
JM0037665
2
Danger, Keep Hands and Clothing Away Decal (Small) JM0076817
3
Warning, Keep Hands Away Decal
JM0018039
4
Warning, Keep Lug Nuts Tightened Decal 1-5/8” x 4”
JM0010150
5
Danger, Keep Hands and Clothing Away Decal
JM0018035
6
Danger, Keep Off Ladder Decal
JM0018034
7
Danger, Electric Lines Decal
JM0015099
8
Danger, Do Not Enter Grain Tank Decal
JM0018033
9
Danger, Rotating Driveline Decal
JM0018036
10 Open Decal
JM0025433
11 Closed Decal
JM0025434
12 J&M Oval Decal (Large) 9-1/2” x 15”
JM0015151
13 J&M Oval Decal (Medium) 5-1/2”x8-1/2”
JM0010179
14 GC31t-1 OAS Stripe Complete
JM0046656
15 GC31t-1 AS Stripe Complete
JM0046655
16 Check PTO Overlap Decal
JM0025435
