1. To charge the unit, plug the supplied USB charge/data cable into the
Charge Port (D). The red LED will turn on to indicate that the Battery
is charging. The red LED will turn off when the battery is fully charged
and ready for use. The charger can also be left plugged into the unit for
extended periods of time, without overcharging the battery.
2. To turn on the BT-04, press and Hold the Intercom/Search Mode Button
(C) together with the Multifunction Button (F) for about 4 seconds. The
Blue LED will then slowly flash.
3. To put the unit into pairing mode, turn on the unit, then press and hold
the Multifunction Button (F) for 5 seconds or until the red and blue
LED alternately flash rapidly, at which point the BT-04 is now in pairing
mode.
4. For volume-up (B) adjustments press once momentarily for each step
of volume increase. Press and HOLD for 2 seconds to track-down to the
previous music track.
5. For volume-down (A) adjustments press once momentarily for each step
of volume decrease.
6. Press the multifunction button (F) to answer an incoming phone call.
7. Press the multifunction button (C) once to initiate voice command
dialing.
Supported Bluetooth Profiles:
• HSP (Headset Profile)
• HFP (Handsfree Profile)
• A2DP (Advanced Audio Distribution Profile ((Streaming Stereo))
• AVRCP (Audio Video Remote Control Profile)
• JMAHP (J&M Motorcycle Audio Headset Profile)
• JMDPI (J&M Private Driver/Passenger Intercom Profile)
6. General Operation of the BT-04 Control
Pairing and Operation with a Bluetooth enabled Cell/Smart
Phone.
1. To turn on the BT-03+/BT-04, press and Hold the Intercom/Search
Mode Button (C) together with the Multifunction Button (F) for about 4
seconds. The Blue LED will then slowly flash.
2. Put the control head into pairing mode by pressing and holding down on
the multifunction button (F) for approximately 4 seconds until you see a
rapid red/blue alternating flash.
3. Then select the hands-free menu option on the cell phone, turn on
the Bluetooth section and search for devices. When JMCORP_BT04 is
displayed on your screen, select it and your cell phone will pair with the
headset. (If you are asked for a pass-key during the pairing process, use
0000)
4. When receiving an incoming call, the incoming call indicator “alert tone”
will be heard in the headset speakers. To answer the incoming call,
momentarily depress the multifunction button (F).
5. Momentarily press the volume-up (B) or volume-down (A) buttons to
adjust the phone volume during the cell phone conversation. Additional
cell phone volume adjustments can also be made on the cell phone
itself, but during actual conversation only.
6. To terminate the phone call from the headset, depress the multifunc-
tion button (F) briefly or just wait until the party that you were speaking
with to hang up.
7. To utilize “voice command” dialing, (the cell phone must support this
feature), press the multifunction button (F) once and listen for the
voice/tone prompt from the cell phone. To redial the last number
called, press the multifunction button (F) twice rapidly.
8. To hear stereo music files and/or navigation commands from your
smart-phone/multimedia device into the headset speakers, refer to
the operations manual for your particular unit, that concern stop/start,
play/pause, navigation prompts etc. when using a linked Bluetooth
headset.
Pairing and Operation with a Bluetooth Enabled Cell/Smart
Phone simultaneously with a Bluetooth Stereo Dongle or
MP3 player.
1. Once your smartphone is paired with the BT-03+/BT-04 then power-
on the stereo dongle or MP3 player & put it into pairing mode. Put the
headset into a pairing mode by pressing and holding down on the mul-
tifunction button (F) for approximately 4 seconds until you see a rapid
red/blue alternating flash. Both the MP3 player or stereo dongle and
the headset LED’s will be flashing rapidly until the two unit’s pair and
the LED’s flash at a slower rate.
NOTE: Before using
the BT-04, its internal
lithium/polymer power
cell should be charged
for at least 6 hours.
7. Operation Instructions
E. Aux Input
BT-04
C. Intercom/Search
Mode Button
D. Data and Power Cable Port
B. Volume Up
G. Headset
Connection Port
A. Volume Down
F. Multifunction Button
