9
STEP THREE - All models
•
Align the motor shaft key with the keyway in the flexible flighting.
•
Attach the hydraulic motor (JM0042491) to the talc box using the three 1/4”-28 x 3/8” hex bolts and tighten.
•
Install and tighten the 10-32 x 1/4” Cup-Point Set Screw once the motor is in place.
STEP FOUR - All models
•
Tap the flighting with a hammer to confirm that the flighting washer is properly seated. Tighten the set screw on the hydraulic mo-
tor shaft.
STEP FIVE - (Skip this step for LC 535 units)
•
Remove the rubber door skirt (below doors) from the SpeedTender and fasten the talc spout bracket (JM0042542) and talc rubber door
skirt (JM0042688) to the bottom of the SpeedTender door. Hand tighten fasteners.
Talc Spout Bracket
Rubber Skirt
Attaching Motor and Door Skirt
1/4"-20 x 3/4" Gr5 Z SF Hex Bolt
1/4"-28 x 3/8" Gr5 Z Hex Bolt
1/4"-20 Gr5 Z SF Hex Nut
Install and tighten the 10-32 x
1/4” Cup-Point Set Screw once
the motor is in place.
Summary of Contents for 206270
Page 2: ...2...
