Fig. D
8. Make Amplifier/Speaker connections according to
diagram.
(Figure E)
FOR ULTRA’S AND MODELS WITH A CB AND/OR SAT
RADIO, CONTINUE WITH STEPS (9) THRU (11), FOR BIKES
WITHOUT A CB OR SAT RADIO, PROCEED TO STEP (12).
9. Install the previously removed CB and/or SAT Radio
modules into the J&M lower mounting bracket and secure
using the (2) 8-32x1/4 screws provided. (these are the
longer of the remaining screws)
(Figure F)
10. Position the lower bracket assembly below the factory
radio and secure using the (4) remaining 8-32x3/16
screws provided.
(Figure G)
(Remove and re-secure any
factory wiring attached to the bottom of the radio using the
tie-straps provided)
11. Re-connect the CB and/or SAT Radio harness and
antenna connectors.
12. Test the system for proper operation before
reassembling the fairing, realizing that full sound quality
and fidelity will not be heard until the outer fairing shell is
completely reinstalled.
remove
loosen
Fig. C
Power Harness
Right Speaker
Left Speaker
Amplifier
White/
Orange
Green/
White
Gray/
Red
Green
/Black
Orange
Orange/White
Acc. wire from
headlight harness
Factory
Speaker Harness
Gray/
Red
Green/
Black
Green/
White
White/
Orange
Right
Left
Fig. E
Fig. F
