J&J Sanitary Ware SPA-565, Operating Instruction

Page: 4 / 15

In the status of time setting It will add 1 minute when pressing
“
MIN
”
each time and the minutes
could be added continually when pressing the
“
MIN
”
without stopping. The minute adjustment range is
0~59
The system will quit the time-setting status automatically after 6 seconds without pressing any buttons
4
、
Set pre- circulation-cleaning
：
In the pre-set mode circulation will be automatic once per day. The display will show clearly whether
circulation is in action or not. See following Fig 5-6 ：
AM AM
Fig.5
： Circulation-cleaning off
Fig.6
： Circulation-cleaning on
When setting the Circulation-cleaning the display must be in the “Power off” status and the LCD display “---”
1
） 、
Press“ ” to enter Circulation-cleaning setting mode and the LCD shows and flashes “ ”,and
then the circulation works on. Press “ ” again to off the circulation cleaning, and the “ ” will
disappear.
2)
、
Press“ ”
（
minutes
）
and“ ”
（
hours
）
to adjust the time.
It will add 1 minute when pressing
“
MIN
”
each time and the minutes could be added continually.
The adjustment range is 0~59.
It will add 1 hour when pressing
“
HOUR
”
each time and the hours could be added continually. The
adjustment range is 0-23.
After setting the circulation cleaning pre-set timing, go to next step .
4