1
(See Illustration) Attach seat (B) to leg (D) by aligning holes in the leg crossbar with corresponding holes in seat frame. Using hex key (J) secure screws
(E), flat washers (H) and hex nuts (G). Attach seat (B) to leg (C) by aligning holes in the leg with corresponding holes in seat frame. Using hex key (J)
secure screws (E), flat washers (H) and hex nuts (G). Do not fully tighten fasteners.
Slide back (A) between legs (C/D) and align holes. Insert screws (F) through holes. Using hex key (J) secure with flat washers (H) and hex nuts (G).
Place bench upright on a flat, level surface and tighten all fasteners. Slide plastic nut covers (I)
over all exposed nuts.
H
H
G
G
I
I
E
E
E
E
F
F
A
B
F
F
C
D
Left
Right
BACK
