One Sheet Glider
Building Instructions
Congratulations on your purchase of the One Sheet Glider catapult glider! You are about to build an easy to fly
glider capable of long flights in calm air. Please watch the One Sheet Glider build video at
https://www.youtube.com/watch?v=msrLJogxusQ
to complete your model beginning construction
1.
Parts list
Before beginning construction, please verify that your kit contains all of the necessary parts listed below. Please be
aware that some of the laser cut parts may have separated from their carrier sheet, so you should ensure that all
of those parts are present and undamaged.
1.
Parts Sheet, 1/16” balsa
2.
Catapult Handle (pine dowel, 6” long)
3.
Nose weight (modeling clay)
4.
Catapult rubber (1/8” Tan Supersport, 36”
long)
J&H Aerospace
Summary of Contents for One Sheet Glider
