background image

Important requirements

The MFG requires that you contact your local, licensed plumber and licensed electrician to install your new spa.  Installation MUST 
be in compliance with all local and state building codes.  Your pedicure spa can not operate efficiently or safely unless it is provided 
with adequate electrical power, sufficient water pressure, proper water temperature, and required drainage capabilities. Contact your 
local building inspector for information and local code compliance procedure that need to be followed when having your new pedicure 
spa installed.  Subsequent inspections and approvals that may be required are the responsibility of the purchaser.

Thank you for choosing EPISODE LX series , This finest Whirlpool Pedicure Spa has been develop and Manufactured by 
J&A USA Inc., to bring quality and exquisitely balanced design yet afford-ability and dependability when properly use. 
Please read this entire manual thoroughly before installation and use

Precaution

 

Do not stand in the basin of the spa.

 

Excessive water temperature is dangerous and should be checked before use. Maximum water Temperature should not exceed        

100F  

 (38C).

 

Always enter and exit the spa slowly and carefully.

 

Never bring or operate any electrical device near pedicure spa.

 

The unit has a weight capacity of 250 pounds.

Health Warning

Individuals whose feet or legs are inflamed or have open wounds should not be allowed to use the pedicure spa at any time. The 
technician should advise clients to consult their physician before using the spa if there is any sign of fungal infection, swelling, 
fracture, or persistent pain. In some cases diabetics may experience improved circulation in their feet, but should first consult their 
physician prior to receiving a pedicure.

If the client experiences any pain or discomfort, discontinue the use of the pedicure spa 

immediately.

Shipment Inspection

Examine the components immediately upon arrival to make sure no damages to the pedicure spa base and chair during the shipment. It 
is very important that you notify the driver directly

 

and

 

notation

 

should

 

be on the face of the freight bill or bill of lading of any 

damage.  Failure to note damage on the bill of lading may prevent any claims you may have against the carrier.

If concealed or damage is found, you MUST notify the carrier at once and request an inspection.

 DO NOT DISCARD THE 

SHIPPING CARTON

 If

 

receiver

 

sign

 

the

 

carrier

 

clean

 

receipt

 

of

 

goods

 

that

 

have

 

been

 

damaged

 

in

 

transit 

.

D

o so at your own risk 

and expense.

 

PLEASE

 

TAKE

 

TIME

 

TO

 

READ

 

THIS

 

MANUAL

 

THOROUGHLY

 

BEFORE

 

USE

If

 

you

 

have

 

any

 

questions

 

or

 

concerning

 

with

 

our

 

pedicure

 

spa

Please

 

contact

 

our

 

customer

 

service

 

and

 

technical

 

support

 

at

 

631-243-3336 ext 121

Monday

 

through

 

Friday

 

9AM

 - 

5PM

 

or

 

email

 

us

 

at

 

[email protected]

Introduction

Summary of Contents for EPISODE LX
























Reviews: