Getting Started
(continued)
Page 6
Charging the battery using a Cradle Kit continued:
3. Place the device in cradle. The LED on the device will illuminate to confirm connection.
4. The battery is fully charged in approximately 6 hours.
5. To charge a battery in the spare battery well, insert the battery into the well top down (connectors
on the battery should face downward and to the back of the cradle) and gently press down. The LED
light on the cradle will illuminate to confirm connection.
C. REMOVE THE BATTERY
1. Lift up the metal battery door lock switch until it is open.
2. Remove the battery by pulling down the hook at the bottom side of the housing and lifting up the plastic tab
at the battery.
3. MicroSD card slot (as marked) is now accessible in upper part of housing.
D. ACCESS MICRO SD CARD SLOT
1. After removing the battery, lift the media card compartment cover using notch at the top (it drops
down to open).
2. To access the microSD card slot, slide silver microSD card cover to the left.
Operating Temperature Range: -20˚C to 50˚C; -4˚F to 122˚F
XG3 Series Quick Start Guide
