JAMO E 800, Manual

Page: 10 / 11

6
Connection A general rule is that the longer a cable
is the better quality cable should be
used, to avoid loss of sound quality in
the cable. Therefore: never use longer
cable than necessary, but preferably
the same length to each speaker.
The connection of speakercable is done
as follows:
1. Turn off the amplifier
2. Carefully remove approx. 10 mm of
the insulating material - beware not
to damage the conductors!
3. Twist the conductor ends
4. Turn the terminal screws counter-
clockwise until the conductors can
easily be inserted into the holes
5. Turn the terminal screws clockwise
until the cables are secured in the
terminals
To avoid damage on the amplifier,
never short-circuit the plus (+) and
minus (-) wire.
Your Jamo dealer can give you
advice on which cable to use.
Cable