background image

 

6

D 4CEN

 

D 4CEN

 is a 2 way bass reflex system featuring two 4½” 

woofers and a 1” DCD tweeter. 

 
The design of 

D 4CEN

 is kept as compact as possible in 

order to make it easier to place the speaker close to the 

TV set. So, the height of just 16-cm/6.3 inch is just 
enough to house the two powerful 4½” drivers. 

 

Actually, you would probably expect that in order to 

obtain optimum timbre matching between centre and 

front speaker you need to use the same size of driver.  
What happens when placing too much cone area in a 

relatively compact cabinet is an overshoot before the 

woofers starts to roll off. This overshoot is often heard 

on centre channel speakers as if the sound was 

recorded with the microphone placed directly on the chest of the actor – not exactly 
contributing to voice intelligibility!  

The cone area of the two 4½” woofers equals less than that of one 6½” woofer, but due to 

the fact that the two woofers are placed closely together and that they are working in the 

same frequency range they load each other at the lower midrange frequencies. This means 

that in this range the cone area equals a 6½” woofer. So, actually by reducing the cone area 
we achieved exactly what we wanted; acoustically identical drivers and thus a seamless 

transition between the front speakers.  

 
The 

D 4CEN

 is of course magnetically shielded, for placing in the vicinity of a normal CRT 

type TV. 
 

 

D 4SUB 

 

The 

D 4SUB

 is equipped with two very powerful 8” 

woofers in a closed cabinet.  
The advantage of using two 8“ woofers instead of one 

large is higher power handling capability - as the heat 

is disposed of in two voice coils/magnet systems - and 

a more compact design – making it a lot easier to find 

a suitable placing of the subwoofer.  
The cone area of the two 8” woofers equals the size of 

an 11” woofer. 

 

The class D amplifier delivers solid 400 watt 

(continuous output) – more than enough to secure 
sufficient headroom – even for a subwoofer reaching down to 22Hz (- 6 dB).  

 

The stand by power consumption is <1 watt – so unless you are not using the subwoofer 

for a longer period of time, there is no need to disconnect it from the mains. Just let the 

automatic on/off circuitry do the daily job for you. 
 

Thanks to the heavy MDF board cabinet, the powerful amplifier, and the specially 
developed woofers,

 

the

 D 4SUB

 delivers a deep, precise and detailed reproduction of the 

low register - perfectly matching the sound from the 

D 4 

front speakers. 

Summary of Contents for D 4 Concept













Reviews: