Made in China
Page
6
of
6
901-M29.5-GW TAMPA MIRROR
IMPORTANT SAFETY INSTRUCTIONS:
When using an electrical furnishing, basic precautions should always be followed, including the following. Read all instructions before using (this furnishing).
DANGER -
To reduce the risk of electric shock:
Always disconnect this furnishing from the electrical outlet before cleaning.
WARNING -
To reduce the risk of burns, fire, electric shock, or injury to persons.
1 -Disconnect from outlet before putting on or taking off parts.
2 -Close supervision is necessary when this furnishing is us.ed by, or near children, invalids, or disabled persons.
3 -Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer.
4 -Never operate this furnishing if it has damaged , not working properly, dropped or damaged, or dropped into water. Return the furnishing to a service
center for examination and repair
5 -Keep the cord away from heated surfaces.
6 -Never operate the furnishing with the air openings blocked. Keep the air openings free of lint, hair, and the like.
7 -Never drop or insert any object into any opening.
8 -Do not use outdoors.
9 -Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
10 -To disconnect turn all controls to the off position, then disconnect from outlet.
11 -For grounded products the following statement:
"WARNING: Risk of Electric Shock - Connect this furnishing to a properly grounded outlet only. See Grounding Instructions.
SAVE THESE INSTRUCTIONS
12 -GROUNDING INSTRUCTIONS
This product must be connected to a grounded metal, permanent wiring system, or an equipment-grounding conductor must be run with the circuit
conductors and connected to the equipment-grounding terminal or lead on the product.
Version:202107
KLRA5E1S19974H3B1P1D
