adjust the amplitude control to give non-clipping
maximum swing. Then adjust R10 and R11
alternately for minimum distortion by observing
the sinusoidal waveform. If a distortion meter is
available you may use it as a final check on the
setting of sine-shaping trimmers. The minimum
distortion obtained in this
manner is less than 1%
om 1Hz to 10kHz and less than 3% over the
tion
he
S1 (rotary
itch) pin configuration refer to our website
ith the part number 101574.
art Number 20685 (FUNCTION
t
r
ied warranty is
pplicable such warranty shall be limited to 90
ive
le
oper,
e
arranty
r
ct, and/or unauthorized repair
are not covered by the warranty. Seller shall have
the right to final determination as to existence and
cause of defect.
fr
entire frequency range.
For further information on the operation of
XR2206 IC, please refer to the datasheets found
on the webpage of Jameco Part Number 20685
(function generator kit). For pin-configura
of S2 (toggle switch) refer to our website with t
part number 22833, and for the
sw
w
P
GENERATOR KIT)
Important disclaimer: to the fullest extent
permitted by applicable law, Jameco expressly
disclaims the implied warranty of fitness for a
particular purpose. Customer should understand
that Jameco does not may any representation tha
products purchased will suit customer's particular
purpose. Customer must rely on customer's own
skill or judgment in selecting suitable products fo
customer. To the extent any impl
a
days from the date of purchase.
Limitation of liability: Jameco's liability shall be
limited to the repair or replacement of defect
products in accordance with the Jameco Limited
Warranty. Jameco shall not be liable for ay
incidental, special, or consequential damages for
breach of any warranty, expressed or implied,
directly or indirectly arising out of Jameco's sa
of merchandise, including any failure to deliver
any merchandise, or arising out of customer's
installation or use, whether proper or impr
of the product, separately or in combination with
other equipment, or from any other cause.
Warranty: Jameco warrants the equipment to be
free from defects for a period of 90 days from dat
of purchase. If found to be defective, the products
will be replaced with a new unit, not repaired. No
unites will be accepted past the 90 day w
for repair or replacement. There is not charge fo
any replacement. Equipment or parts which have
been subject to abuse, misuse, accident,
alteration, negle
