11
Zusammenbau
45. Dampen balsa sheet and use it to plank the upper side of the
wing as shown.
46. Rear wing sheeting.
47. Complete the upper sheeting as shown and fi t the servo cable
extensions.
49. Fit the outer leading edge and the laminated wing tips. Sand
to shape.
48. Make a linkage as shown to drive the air-brakes. Once this is
fi tted the remaining planking should be added.
50. Use 6 + 3mm balsa to form the ailerons and air-brakes. Use
a razor plane and sand paper to feather down to a sharp
edge.
