2. Query operation
(1) Press ▲ up button to browse the last record.
(2) Press ▼ down button to browse the next record.
3. Unit conversion
Battery Replacement
When the screen displays "
LO
", this indicates
the device has a low battery. Do not replace the
battery while the unit is on. Battery replacement steps:
1). Make sure unit is off. Press down the battery
cover top slightly and pull back, the cover will
slide open. See below:
2). Push the golden metal chip outside to make the
cell bounce up; with small tweezers, remove
the exhausted cell. See below:
It will enter the state of unit conversion when
pressed down
for 5-6 seconds, the figure of
KG
or
LBS
will flash in turn when pressed once again, co
-
n
f
irm the unit mode when press the power
button .It will display your unit when turned on again
.
6
2. Query operation
(1) Press ▲ up button to browse the last record.
(2) Press ▼ down button to browse the next record.
3. Unit conversion
Battery Replacement
When the screen displays "
LO
", this indicates
the device has a low battery. Do not replace the
battery while the unit is on. Battery replacement steps:
1). Make sure unit is off. Press down the battery
cover top slightly and pull back, the cover will
slide open. See below:
2). Push the golden metal chip outside to make the
cell bounce up; with small tweezers, remove
the exhausted cell. See below:
It will enter the state of unit conversion when
pressed down
for 5-6 seconds, the figure of
KG
or
LBS
will flash in turn when pressed once again, co
-
n
f
irm the unit mode when press the power
button .It will display your unit when turned on again
.
6
