Jam HX-P606-GY, Instruction Book, Page: 4 / 157

4
USE
A – TURN ON YOUR SPEAKER
Long press the “play/pause” button for 3 seconds to
turn on your speaker.
B – CONNECTING TO A DEVICE
Once turned on, the speaker will immediately search
for a device to pair to. If a device has not been
previously paired, the light will switch from blinking
blue to blinking red and blue alternately. Enable
Bluetooth on your device. From the Bluetooth menu,
select “Zero Chill.” When the device and Zero Chill
are connected, you will hear a tone and the LED light
will turn solid blue momentarily then move to a slow
blinking blue.
You may also connect your device to Zero Chill using
an aux cord, which is included. When plugged in, the
light will turn solid red.
Note: Once paired, the speaker will remember the
device every time it is turned on. To disconnect the
speaker from the device, hold down the “X” and “play/
pause” buttons at the same time, for 2 seconds.
C – BUTTON FUNCTION
Short press the “play/pause” button for 0.5 seconds to
play your music. To increase the volume, short press
the “O” button; to lower the volume, short press the
“X” button. To skip forward a track, long press the “O”
button; to skip back a track, long press the “X” button.
0000
...0.5s
...3s
0000
Zero Chill
Zero Chill
...3s
...3s
...0.5s
...0.5s