GETTING STARTED
DOWNLOADING APP
BATTERY INSTALLATION
ADULT INSTALLATION REQUIRED
Requires 3 “AA” alkaline batteries. When performance diminishes, replace with new batteries.
1. Locate the BATTERY COMPARTMENT on bottom of the
unit.
2. Using a Phillips head screwdriver, remove the SCREW and
BATTERY DOOR.
3. Install 3 new “AA” batteries, matching polarity icons with
those on the BATTERY COMPARTMENT.
4. Replace the BATTERY DOOR and tighten the SCREW.
ALWAYS Power off the unit when not in use to preserve battery power.
WARNING!
Battery acid leakage can cause personal injury and cause damage to the
product and surrounding property. If battery leakage occurs, thoroughly
wash any affected skin, making sure to keep battery acid away from eyes,
ears, nose and mouth. Immediately wash any clothing or other surface
that comes in contact with leaked battery acid. Leaking batteries may
make "popping" sounds. Dispose entire toy according to Local, State or
Federal Battery Laws.
TO AVOID BATTERY PROBLEMS:
- NEVER mix old and new batteries or different brands of batteries.
- NEVER mix alkaline, standard (carbon-zinc), rechargeable
(nickel-cadmium) batteries with this product.
- NEVER dispose of batteries in fire, as they may leak and explode.
- NEVER use rechargeable batteries.
- NEVER attempt to charge non-rechargeable batteries.
- ALWAYS remove exhausted batteries from toy.
- ALWAYS have an adult install batteries consistent with installation
instructions.
- ONLY use batteries specified by manufacturer.
- Batteries are to be inserted with the correct Polarity.
- The supply terminals are not to be short-circuited.
BATTERY SAFETY INFORMATION
SET-UP
1. Remove AUDIO CABLE and SMART DEVICE STAND
from the underside of EZ Pro™ DJ Mixer.
1. Open App Store or Google play market on the supported device.
Please refer to “System Requirements” on page 2 of EZ Pro™ DJ instruction manual for a list of supported devices.
2. Search and install the FREE “EZ Pro™ DJ” app.
NOTE- An additional cost may be incurred by downloading/going online. Check your data charges with your network provider.
Tip:
For voice over and recording audio, purchase EZ Pro™ DJ Mic. Connect EZ Pro™ DJ Mic to DJ Mic Port on
EZ Pro™ DJ Mixer.
DJ Mic Port only accepts EZ Pro™ DJ Mic
.
2. Open SMART DEVICE STAND and place both DJ
Mixer and SMART DEVICE STAND on flat surface.
3. Insert AUDIO CABLE into 3.5mm AUDIO PORT on
your SUPORTED DEVICE (not included) and place
SUPPORTED DEVICE on SMART DEVICE STAND .
*Batteries not included.
AUDIO CABLE
SMART DEVICE
STAND
SMART DEVICE STAND
AUDIO CABLE
3.5mm AUDIO JACK
Page 3
Page 4
EZ Pro™ DJ Mic
* Sold separately
* Not included
* Not included
Device
* Not included
P
R
O
TM
MIX
SEEK
SAMPLE
SCRATCH
MIC
SCRATCH
REC
TALK
SAMPLE
1
2
3
4
5
6
ECHO
EQ
FX
ECHO
EQ
FX
P
R
O
TM
A
B
OR
CUE
* Not included
For cueing only