SW-4010Q-MCL-M52 User Manual (Tentative)
Preparation
- 18 -
Preparation
Read this section to learn how the camera connects to devices and accessories. The preparation
process is described below.
Note:
This camera does not support eBUS Player for JAI.
l
Connect the lens, Camera Link cable, AC adapter, computer, and other devices.
Step 2: Verify Camera Operation
l
Verify whether the camera is turned on and ready for use.
Step 3: Verify the Connection Between the Camera and PC
l
Verify whether the camera is properly recognized.
Step 4: Configure Basic Settings for the Camera
l
Configure the camera output formats, ImageScalingMode, trigger, exposure, and line rate
settings.
Step 5: Adjust the Image Quality
l
Configure exposure time, shutter, gain, DSNU, PRNU, and shading correction settings.
Step 6: Configure Various Other Settings
l
Configure various other settings as necessary.
l
Save the current setting configurations in user memory.
Short ASCII Commands
The most universal method for controlling a Camera Link camera such as SW-4010Q-MCL-M52
is by the use of short ASCII commands sent via serial communications. All Camera Link frame
grabber boards support the use of these short ASCII commands. SDKs that utilize these ASCII
commands for developing machine vision applications are typically available from the grabber
manufacturer, as well as from third-party vendors.
