JAI RM/TM-1327GE Series, User Manual

Page: 10 / 62

RM/TM-1327GE Series
10 Hardware Introduction
•
Electronic shutter
The TM-1327GE has a substrate drain-type shutter mechanism which provides superb pictures at various speeds
without smearing.
•
Asynchronous reset
The TM-1327GE captures asynchronous reset images and provides single-shot video output with single FDV. This
makes it simpler for an ordinary frame grabber to capture the asynchronous reset images. The TM-1327GE’s
asynchronous reset is flexible and accepts external horizontal drive (HD) for phase locking. When the VINIT (5V)
pulse is applied to pin 6 on the Hirose, or the PLC 12-pin connector, it resets the camera's scanning and purging
of the CCD.
The TM-1327GE has three modes to control the asynchronous reset and shutter speed:
−
Async, no shutter. The video signal and FDV are reset by external VINIT.
−
Async Programmable shutter. The shutter speed control depends on the number of horizontal lines
controlled through software commands.
− External VINIT with pulse width. The duration between pulse edges controls the shutter speed
externally.
•
Output
The TM-1327GE has a 10-bit/8-bit Gigabit Ethernet output. The analog output is 714 mV p-p composite video
(75 ohms) on all models.
•
Warranty
Contact your factory representative for details about the warranty.